To overview

PNMA II – PROFINET measuring point

For nonreactive access in PROFINET

PROFINET measuring point PNMA II

The PROFINET measuring point PNMA II provides nonreactive access for telegram recording in the PROFINET and other Ethernet-based networks (e.g. Industrial Ethernet) during running production.

For use in harsh environments or outside the control cabinet, the IP67-certified PNMX variant is available.

Highlights PROFINET measuring point PNMA II

  • If connecting a PROFINET-INspektor® NT via a PNMA II, only two additional patch cables are needed (no crossover cable required).
  • In case of a power supply failure the PROFINET communication via the PNMA II remains intact.
  • Power supply of additional analytic tools via the UOUT (24VDC) connector
  • PNMX IP 67 for rough production environments

Function

Analysis tools (e.g. PN-INspektor® NT or laptop) can be connected nonreactive to the two monitor jacks to monitor both communication directions simultaneously. For evaluation of the
measurement results the telegrams from both communication
directions can be overlaid. The PNMA II / PNMX does not discard
error telegrams. Instead, it forwards them.

Properties

  • Monitoring of all protocols
  • Supports all packet sizes
  • No packet loss
  • All connection ports on the front panel
  • No additional effort to connect a measuring device
  • Tested interaction with the PROFINET-INspektor® NT
  • No free switch port necessary
  • Bi-directional data transmission up to 100 Mbps
  • No network interruption when connecting diagnostic tools
Integration PNMA & PNMXIntegration of the PNMA II measuring point (also PNMX) in the PROFINET network

Product details

Request offer for PROFINET measuring point PNMA II
Product name Art. No.
114090100
114090300


Downloads


Safety instructions We recommend integrating an appropriate protection concept for the safe operation of the PNMA. The PNMA may only be operated in conjunction with a safety extra-low voltage supply of limited power (according to IEC/EN 60950-1/VDE 0805-1).
The unit must not be operated with AC voltage or DC voltage greater than 40V DC.

The IIT Network Equipment Supplier brochure

IIT Network Equipment Supplier brochure Indu-Sol GmbH

From the component to the system solution - our IIT portfolio in one brochure!

PROFINET brochure

PROFINET brochure Indu-Sol GmbH

Technological coherences in detail that are based on the latest valid standards and guidelines