Objectives and Structure of the Training
The user training for CAN based fieldbus systems from Indu-Sol qualifies your staff within one day in the theory and practice of CAN based networks.
The training is structured so that all participants from the departments planning, commissioning, maintenance and service become acquainted with the subject of CAN/CANopen/DeviceNet/SafetyBus p in a straightforward manner. Basic knowledge of industrial automation is recommended.
The training participation is confirmed by a certificate from Indu-Sol.
Employees from the departments planning, commissioning, maintenance and service
Content of the Training
General principles of CANBUS protocol
(layers 1 and 2)
- Principles of High-frequency Data Communication
Physical transmission principle, logical telegram structure, EMC / shield current issues, symmetrical data transfer of differential voltage signals, Signal form – quality feature of data transfer
- Physical Data Transfer CAN (ISO/OSI layer 1)
Signal voltages dominant/recessive, Bit times, Bus access via bitwise arbitration (CSMA/CA)
- Logical Data Transfer CAN (ISO/OSI layer 2a)
Telegram structure, NRZ bit coding, Bit stuffing
- CANopen (ISO/OSI layer 2b and higher)
Producer/Consumer communication method, CiA installation guidline for CAN networks, CANopen telegram structure
- DeviceNet (ISO/OSI layer 2b and higher)
Producer/Consumer communication method, ODVA installation guideline for DeviceNet networks, DeviceNet telegram structure, CIP common industrial protocol of DeviceNet
Metrological quality determination / Troubleshooting
- Determining the Physical Signal-to-interference Ratio
Quality characteristics of physical data communication, How well is the network actually?, Acceptance and test criteria
- Procedure for Commissioning/Service – Maintenance – Repair
Tools / measuring and test equipment for problem analysis and fault location, Explanation of physical and logical measuring principle of measuring devices
- Practical Application
- Workshop using Machinery/System or Indu-Sol’s Sample Set-up
- Determining the Communication Parameters
- Metrological Quality Determination
Handling and using measuring and test tools, Calibrating the communication quality, Evaluating and analyzing measured data
- The Real Problem – Sporadic Failures - „It works…It doesn’t work“
Problem analysis, fault analysis/troubleshooting, Measures and recommendations, Evaluation and analysis of measuring results, Drafting the measuring and test record
The training is structured so that all participants can be made acquainted with the subject of SafetyBUS p including CAN/CANopen/DeviceNet in a straightforward manner. Basic knowledge of industrial automation is recommended.
SafetyBUS p User Training
- Comprehensive training material
- Certificate from Indu-Sol
We are pleased to customize our user training regarding duration and participants. Thus the price varies. Please let us know your favored date.
We arrange training contents and points of focus individually according to your operational concerns. Contact us!
Training at your premises
We would be pleased to arrange a DeviceNet user training at your premises on your request. Therefore we create individual training contents according to your operational concerns. We customize our user training regarding duration and participants. Thus the price varies. Please let us know your favored date. Contact us!
One-day training | Price on request
- +49 (0)34491 / 5818-12
- +49 (0)34491 / 5818-99
- Send an email