PROFINET monitoring
Long-term security of your plants
Delivery concept

Indu-Sol delivery concept PROFINET monitoring

Delivery concept „PROFINET monitoring“


Indu-Sol GmbH has developed an overall concept for safeguarding your PROFINET-controlled systems in which the communication quality is checked with a permanent passive data collector based on a PROFINET-INspektor® NT and in case of irregularities an alarm is issued before the failure.

The concept serves a long-term security, a reliable and stable functioning plant control and finally the security of the production processes. In addition to the hardware, the delivery concept also integrates the services, which include the metrological acceptance of the network, the creation of a protocol of the results and the qualified instruction of the maintenance personnel on the plant.

Indu-Sol delivery concept PROFINET monitoring

The delivery concept includes

Delivery of hardware for permanent network monitoring

  • PROFINET-INspektor® NT


  • Evaluation of the obtained network data for compliance with the planning and specifica-tion requirements:

    • Creation of the real topology plan
    • Network topology and current port assignments
    • Device name/types, IP / MAC addresses, subnet mask / gateway
    • Hardware and firmware versions of devices and modules
    • Damping reserves with LWL (polymer fibre)
  • Assessment of communication quality

    • Device failures and diagnostic messages (alarms)
    • Faulty telegrams and telegram gaps
    • Telegram jitter / delays
    • Network load
  • Random EMV assessment

    • Recording of currents on the bus screen and the equipotential bonding conductors with EMheck® LSMZ I
    • Recording the mesh resistances of the bus screen and the equipotential bonding conductors EMCheck® MWMZ II

  • Setting the thresholds individually adapted to your network

Weiterlesen Weniger anzeigen

Instruction of the maintenance personnel

Final evaluation from Indu-Sol

  • Evaluation of the cable protocols (cable connectors) prepared by the installer with regard to planning and specifications conformity with regard to the attenuation table for fieldbus technology

  • Preparation of an acceptance protocol after continuous monitoring under conditions close to production (after input of the responsible maintenance personnel)

  • Evaluation and evaluation: Acceptance granted Yes / No

Weiterlesen Weniger anzeigen

Talk to us!

For further information and questions about the delivery concept, please contact our Key Account Management.

Arrange callback

Thank you

Your contacts in Key Account Management have been notified. They will contact you immediately.